How do I add the camera to the App?

How do I add the camera via Bluetooth?

1. Enable Bluetooth on your phone.

2. Reset the camera and make sure it’s in sync mode (you’ll hear the voice prompt: “Your camera is now in sync mode.”).

3. In the app homepage, tap '+' → Add Device.

4. The camera will appear under Nearby devices. Select the device, and you’ll enter the actual Add page.

5. Tap the “Add” button, then enter your Wi-Fi name (SSID) and password when the “Please input Wi-Fi information” window pops up.

Important Notes:

• Enter the Wi-Fi name and password exactly, paying attention to capitalization.

• Keep the camera close to the router during setup for a stable connection.

• Use a 2.4 GHz Wi-Fi network unless the device specifically supports dual-band (2.4 GHz / 5 GHz).

1.All-in-One Camera – Bluetooth Standalone Pairing

2.Dome Camera – Bluetooth Standalone Pairing

3.Battery Camera – Bluetooth Standalone Pairing (Method 1)

4.Battery Camera – Bluetooth Standalone Pairing (Method 2)

How do I add the camera by QR code?

1. Reset the camera to enter pairing mode.

2. In the app homepage, tap '+' → select the corresponding device → enter Wi-Fi details.

3. Show the QR code to the camera lens until you hear a beep.

4. Continue in the app to complete setup.

Important Notes:

• Enter the Wi-Fi name and password exactly, paying attention to capitalization.

• Keep the camera close to the router during setup for a stable connection.

• Use a 2.4GHz Wi-Fi network unless the device specifically supports dual-band (2.4GHz / 5GHz).

1. All-in-One Camera – QR Code Standalone Pairing

2. Dome Camera – QR Code 2.4GHz Standalone Pairing

3. Dome Camera – QR Code 5GHz Standalone Pairing

4. Battery Camera – QR Code 2.4 GHz Standalone Pairing

5. Battery Camera – QR Code Dual-Band Standalone Pairing